DRZ manual camchain tensioner

skidmark43

Administrator / BFF in the blue jacket
This eBay auction ends in the pre-dawn hours of Friday Dec. 31st.

Supposedly a 'must have' item for 2000 - 2003 DRZ's. There is a long history of the automatic tensioners failing without warning (on several other Suzuki models too I might add) and causing very expensive top-end damage.

When I purchased my 2000 model last February this was one of the first mods I invested in.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4514297510&category=10066

Even if you miss the auction, do your homework on this mod & if you think it's a good idea order one from Thumper, Ape, or your local dealer.
 
E

EKrider

Guest
imported post

imported post

these manual tensioners are easier to find if you search suzuki hyabusa they use the same same tensioner
 

Bugsinteeth

New member
imported post

imported post

My APE tensioner leaks a slight bit of oil through the threads of the main bolt. It also requires imperial wrenches to adjust it.It has been said on the internet that the Bitech one has a better design for oil sealing problem. Bitech is Canadian eh. I can't be certain but I suspect it can be adjusted with metric tools like we all have in our existing tool kits (unconfirmed!!!) If anyone can confirm this last point through experience please speak up.

If I was doing this swap again my $$ would stay in Canada and go to the folks @ Bitech Machine.

Cheers Paul
 
M

MyFirstThumper

Guest
imported post

imported post

The BiTech is a quality piece. It is adjustable with 17mm.

This wouldn't happen to be the Paul I just met at the Sumas Park would it?
 

Bugsinteeth

New member
imported post

imported post

Hello MY First Thumper,

Yes indeed it is the Paul you met in Sumas. I hope you can make it up for either the Dead Zone or the Routledge Run as we discussed. These rides are fantastic fun. That big teraflex tire on your bike is just itching to spray around some Canadian dirt! No deadzone for me as I'm out of town but I won't miss the Routledge for anything! Hope to see you there.

Cheers, Paul
 
M

MyFirstThumper

Guest
imported post

imported post

Bugsinteeth wrote:
Hello MY First Thumper,

Yes indeed it is the Paul you met in Sumas. I hope you can make it up for either the Dead Zone or the Routledge Run as we discussed. These rides are fantastic fun. That big teraflex tire on your bike is just itching to spray around some Canadian dirt! No deadzone for me as I'm out of town but I won't miss the Routledge for anything! Hope to see you there.

Cheers, Paul
Hi Paul,

I am planning on making it up there for some of the rides you guys have. Sounds like fun.

Back to the MCCT some guys have had success stopping the seepage by backing off the lock nut on the APE and applying some high temp RTV sealant to the threads and then locking the nut back down.
 

skidmark43

Administrator / BFF in the blue jacket
imported post

imported post

Based on a conversation with a friend & a mechanic this afternoon, I couldn't help myself from 'bumping' this thread.
 
Top