DRZ valve adjustment

dirtdoug

New member
imported post

imported post

For a high tech motor looks pretty simple.Nice how everything slides out of the way.Ihelped dothe valves on my brothers CBR 600 F2 once, had to take the cams out. To get at it remove: bodywork, tank, airbox, coils, undo the radiator and move it forward, undo the motor mounts and pivot the motor ahead so we had room to do it. My bother is a mechanical engineer so this was easy for him. For me a bit confusing. That being said I had the exact same bike, road raced it, drag raced it, toured on it/ 60 000 hard km never out of adjust once. Always checked but never out of adjust.

My XR 650L takes about half the time (threaded adjusters w/ locknuts) of the Husky. About half the peformance power wise so I guess that's fair. Part of the reason I bought it was the ease of maintenance. I have little kids so spare time to work on the bike, let alone ride, is hard come by. Going to be hard not to look at the Husky when it comes time to by something more modren (Memo to Honda get your big bore act together). Got a vid on how quick it can be converted to a SuperMoto setup?

Thanks for the vid.
 
Top