KTM street legal?

Cshuman

New member
Hey new to the group! I have an opportunity to buy a 08 exc525 with 30hrs for a good deal. My question is that is the bike street legal in BC? It has all the mirrors, plate holder, hi/lo beam and signal lights from factory. What am I looking for on the vin sticker to know if it street legal in BC?
 

Rustic

DSBC President / BCORMA Director
Staff member
It should be, just verify it has a regular VIN plate on the fork tube and does not state RUM (Restricted Use Motorbike).
If your uncertain take the VIN to autoplan agent and they can conform it.
 

04klr

Well-known member
first year of full legit 525 was 07 so you're good to go! 30 hrs on one of the best engines ktm has made, buy it!!
 

cactusreid

Active member
first year of full legit 525 was 07 so you're good to go! 30 hrs on one of the best engines ktm has made, buy it!!
Some of the 08's had an oil transfer issue as they had two separate sumps, one for the tranny, and one for the crank. All the oil would try and get on one side. I believe the fix involved splitting the cases, drilling passageways and converting it back to a common oil sump for both sides.
something to ask about? 30 hrs is crazy low for an 08 bike! I wonder why it never got out much?
 

broxy

Member
There are parts like updated gears, little shaft and o rings that fix the oil transfer issue, which if an ‘08, should be done. Parts are cheap, task is easy. I’ve done one case mod to make separate oil in engine/ trans shared, but I haven’t even done my own, at 270 hours. It’s not getting much love these days. I’ll split the case soon for a refresh, but these bikes are bulletproof! 👋🏼 Reid!!!
 

DarOv

New member
There are parts like updated gears, little shaft and o rings that fix the oil transfer issue, which if an ‘08, should be done. Parts are cheap, task is easy. I’ve done one case mod to make separate oil in engine/ trans shared, but I haven’t even done my own, at 270 hours. It’s not getting much love these days. I’ll split the case soon for a refresh, but these bikes are bulletproof! 👋🏼 Reid!!!
How much do you think this task would cost in a workshop? I'm afraid of breaking something, since I don't have much skill.
Hi all :)
 
Last edited:
Top