New horn installed on the KLR

G

Guest

Guest
As anyone with a KLR already knows, the stock horn cannot be heard by anyone you need to the attention of......its totally pathetic really.



So after talking to Yak, I decided to replace it with one that can be heard.



So just finished swapping the stocker out for a Fiamm Hightone "E" I got at Canadian Tire, price is $27.95.



Had to modify the bracket a bit to make it fit, and cut the expansion bottle protective cover down a bit, and then it was fine.

Simply put it rocks ! :clap::dr::tup::hb::D:dr:



Hopefully now I can wake up the retards that cut me off etc.
 
G

Guest

Guest
imported post

imported post

masonjarz wrote:
Has anyone tried this mod on a 2007 or older KLR?
Actually yak did it to his KLR ( unsure what year his is) and he liked it so much I copied him. ;)
 
K

Keys

Guest
imported post

imported post

Well, you saved me having to post the question... I'm heading to Canadian Tire tomorrow; any photos of the mod?

A friend of mine actually mounted an air horn, but had to remove it for fear of causing heart attacks in nearby pedestrians. LOL

I'll let him know about the Hightone.

Thanks!
 
G

Guest

Guest
imported post

imported post

Keys wrote:
Well, you saved me having to post the question... I'm heading to Canadian Tire tomorrow; any photos of the mod?

A friend of mine actually mounted an air horn, but had to remove it for fear of causing heart attacks in nearby pedestrians. LOL

I'll let him know about the Hightone.

Thanks!
Here ya go
 

Attachments

  • Horn 2.jpg
    Horn 2.jpg
    77.2 KB · Views: 0
G

Guest

Guest
imported post

imported post

Yes the body work is obviously still off the bike in the pics, as is the cover over the expansion bottle....because once the stuff goes back on you cannot really see the horn.

Ask Dreadnought and Dorky how loud it is now. ;)
 

Attachments

  • Horn.jpg
    Horn.jpg
    135.6 KB · Views: 0
K

Keys

Guest
imported post

imported post

Thanks!

That's great...exactly where we spec'd mine; We powered the relay coil with existing wiring from the horn button. Now we're trying to decide where to pick up positive supply power to the relay, then to the horn. The negative leg was easy enough. Did you fuse the positive line? We plan to use 10A inline fuse.

Appreciate the advice,

Cheers!
 
G

Guest

Guest
imported post

imported post

Keys wrote:
Thanks!

That's great...exactly where we spec'd mine; We powered the relay coil with existing wiring from the horn button. Now we're trying to decide where to pick up positive supply power to the relay, then to the horn. The negative leg was easy enough. Did you fuse the positive line? We plan to use 10A inline fuse.

Appreciate the advice,

Cheers!

I just plugged the stock wires into it....no relay....works great without it.



But if going to a relay, I would use a wire direct from the battery, with an inline fuse as you mentioned.
 

masonjarz

New member
imported post

imported post

I did the same thing...I mounted it slightly differently so I had to make some extensions for the stock wires but I did not do anything else.

I used the mount that came with the new horn and did not have to cut the expansion bottle guard at all.

Does this horn draw the same as the OEM unit? In other words, did I screw up?
 
K

Keys

Guest
imported post

imported post

Alright, we tested the horn without the relay and frankly it disappointed... so we tested the horn directly from a 12-volt source with heavier gauge wire and it was louder. So there was too much voltage-drop across the tiny existing leads. We used 12-gauge 20A wire soldered directly onto the negative leg under the seat, and we used a ring connector on the positive terminal of the starter relay. We routed the lines up through the fuel tank crease to the relay (mounted near the horn on an existing support) and taped and zip-tied everything securely.

Naturally my phone battery died before I was able to record these steps. It was the only camera available at the time, sorry.

There is also a 5A fuse inline on the positive leg, just to protect the rider. Hehe, that's me!

~d.
 

masonjarz

New member
imported post

imported post

Too bad you don't have any photos. I've never wired in a relay--could you supply a little more information so I know what to buy?

Thanks
 
G

Guest

Guest
imported post

imported post

masonjarz wrote:
Too bad you don't have any photos. I've never wired in a relay--could you supply a little more information so I know what to buy?

Thanks

Any regular 12 volt relay for automotive use should work....and they are easy to wire.

It will have for connections on it.

A power supply constantly on.....power to the switch used to activate it.....ground....and power out to whatever you hook it to, in this case the horn.



Any place like Lordco, can tire, napa etc will have them.
 
G

Guest

Guest
imported post

imported post

ps. always fuse the constant on power supply to a relay, as it should be direct to the positive battery terminal, thus not going thru the bikes fuses, and could potentially cause a fire otherwise.
 
K

Keys

Guest
imported post

imported post

I bought the relay at CanTire... run-of-the mill part, but any tech there would be able to point it out to you if you asked. The relay can be bi-wired or single wire, better to bi-wire. Brown is positive on the KLR (Japan and Europe standard).The relay we used had five connectors, but you'll only need four. There is a rudimentary schematic included on the packaging.

BTW, excellent primer on relays: http://www.airheads.org/content/view/159/49/

We thought it might be better to run off the starter relay so as not to interfere with the isolation boot of the battery terminal.

Before you do any work, be sure to disconnect the positive terminal of the battery; no sense risking a short circuit.

In fact, if you know an electrician, better to get help as I did. It would be a shame to incur damage or injury. I sure wish I had been able to detail the mod with photos. From now on I'm going to use my wife's little cannon digital for this type of thing.

Regards,

~d.
 
Top