wattage output of 07 drz 400e not s model

bajaman

New member
Does anyone know what the power wattage outputof a 07 drz 400e is,not the s model.I want to wire in a electric vest and a gpsin anddon't want to rewind stator if i have too.thanks.
 

Floored

Active member
imported post

imported post

Neither the "S" nor the "E" are great power generators. Along with their small-ish battery, you're asking for trouble.
Do yourself a favor and "Rewind", or invest in the kick start.
 

SubMann

New member
imported post

imported post

GPS' are low power consumers, so don't worry about that. If you put on an LED taillight you'll save a few watts there. Plus it looks better than the "Aid to Navigation" that comes on the bike.

If you own the heated vest already you can hook it up and measure the voltage as your bike is running. Plug and unplug as you bike is running somewhat above idle. Measure the voltage at your battery and see if it changes much. It should be 13.5 volts DC or higher. If the vest drags it down you'll need to rewind your stator or wear a sweater.

I doubt that there is a difference between the S and E models, but I could be wrong. If you can find an online parts list that may have it. I'll keep looking. I have never heard of anyone rewinding a DRZ stator, and I have run a vest on mine. Not much, but it seemed fine. I never measured the voltages though.


Edit: The part numbers are the same.
 

bajaman

New member
imported post

imported post

Great thanks for the info....I have a stator at Ricky Stator for a CRF now.They didn't know the out put for the DRZ.I'll check into it,if i don't have enough out put I'll send the stator to"Ricky" for 100w er.:D
 
Top