aftermarket bars for the 09 klx 250s.

[UnbForester05]

Well I've bent the stock bars on the klx. Time for a replacement. Considering Renthal 7/8th RC bend bars as that what is shown to fit the klx on the Renthal Website.

Just curious if any folks on here with the 09 KLX have switched out your stock bars for aftermarket and if so what make and bend did you choose?

I want to use 7/8th bars so that I do not need to replace the clamps. Also concerned with the rise and width of new bars and cable length. Any feedback would be great..

Thanks

 

[chico]

imported post

imported post

Hi unbforester05

I have a 2006 klx 250s I put on a Renthal bar I also went for the 7/8 bars
so I would not have to replace the triple clamp My bars 31 1/2 inches in width
with a 3 inch rise. Renthal are a very strong bar I have layed the bike down several times and had no bent bar issues :tup: