Breaking the bead out on the trails.

K

katanarama

Guest
So you have your tire irons, spare tubes and inflation device. But what is the best way to break the bead while out on the trails?
 

c337b

Moderator
Use the kick stand on your buddy's bike Place it on the side wall and press down using the bikes weight to break the bead
 

gryphon51

New member
The worlds oldest machine.... the lever..... one long firm stick or branch, One short Y shaped stick, wedge one end of the long branch below a rock or other immovable object, place the bottom of the Y down along the bead and apply your weight to the end of the long pole inserted into the V of the Y.... I have done this at home with 2 x 4's the same principle applies...... this works very well if for some really crazy reason, your buddy is not there with a kickstand....
 

Sparkle

New member
I've used and even older machine.....a hammer. Grab a sturdy thick piece of wood, or a thick fat straight stick about a foot long....a wedge shaped end is good too. Hold the tip of the wood on the bead near the rim and smack the stick with a rock using the stick like a big soft chisel to work under the bead. Probly won't work on big fat tubeless tires, but works on my bike.

Sparkle
 
O

old trials guy

Guest
So you have your tire irons, spare tubes and inflation device. But what is the best way to break the bead while out on the trails?

Ride it flat till the tire comes off the bead. If it doesn't come off then you don't have to fix until you get home.

otg
 

Mad Max

New member
I've used and even older machine.... Hold the tip of the wood on the bead near the rim and smack the stick with a rock using the stick like a big soft chisel to work under the bead.

Sparkle
YES see I am right a REAL HERO uses a ROCK:bliss: and a STICK

Ride Hard

Max
 

Bones

Member
:hijackedA real hero uses his body to protect his bike from damage during a wipeout.
Sorry Max.
Cheers
Bones
 
Top