Counter sprocket

M

myran

Guest
Have a new counter sprocket I'll probably try installing tomorrow. Any words of advice/warnings anyone would like to share? I need all the help I can get. Thanks.
 

Buck

Moderator
imported post

imported post

Have you done this before on other bikes? It's usually very simple. Loosen the chain, remove the countershaft sprocket cover, swap sprockets, re adjust chain to spec!There are different methods of securing the sprocket depending on the make and model. Not sure about your DR200 but the DR650 is held by three bolts, using an 8mil socket to remove. Others use a large nut, difficult to remove unless using an air impact. I have the tools if you need help but will be away on Sunday.
 

dirtrider

Member
imported post

imported post

If it has a big nut, leave the chain on, have a friend sit on the brake, then loosen the nut...
 
imported post

imported post

yea, make sure the bike is in neutral when you have buddy stand on the brake. a few drops of red locktite on the splines where the sprocket will rest isnt a bad idea, some put a few drops of blue locktite on the threads of the CS bolt too. this is a known issue/fix with the DRZ400's...
 
M

myran

Guest
imported post

imported post

Absolutely perfect! Thanks all, and no, I haven't done this kind of swap...yet. That's gunna change pretty quick though. Ride Safe.
 
M

myran

Guest
imported post

imported post

Soon as I got up (the crack of 4 pm) I started. Three bolts and the cover came off.

DSC00394.jpg


One bolt in the center and the sprocket almost fell out for me. This is the part I was imagining harmonic balancer-type pullers, blocks of wood and roofing hammers, and big screwdrivers. Oh yeah, I know what I'm doing. Right.

DSC00395.jpg


Old and new, side by side.

DSC00397.jpg


And the new one in place.

DSC00398.jpg


So, despite my techno-fright all went well, and a quick ride in town reassured me that I didn't need those left-over bolts.
 

bajaman

New member
imported post

imported post

Hey myran hows it going???Hey did you gear up/down or keep the gearing the same

on the 200??

:hb:
 
M

myran

Guest
imported post

imported post

I left the gearing alone. I notice a lot more control at really low speeds, and a quick trip through town saw 4th gear much sooner. My top speed used to be just over 120 kmh (how's that for dyno numbers?) and I really only saw 100 today, but to be fair that wasn't on the highway. Shhhhh. I LIKE TO DO IT STANDING UP AND GO REALLY FAST!!

I talked to the guy at the shop and told him my wife would be picking up the sprocket, and she doesn't know much about bikes (kinda like me) so he agreed to show her the orange 450cc accessory that was supposed to go with the sprocket. She didn't pick that up.
 

Buck

Moderator
imported post

imported post

myran wrote:
I left the gearing alone. I notice a lot more control at really low speeds, and a quick trip through town saw 4th gear much sooner. My top speed used to be just over 120 kmh (how's that for dyno numbers?) and I really only saw 100 today, but to be fair that wasn't on the highway. Shhhhh. I LIKE TO DO IT STANDING UP AND GO REALLY FAST!!
Looks like you dropped the gear ratio way down by going from a 15T to 13T. Will be great on the trails but suck on the highway. It's always a compromise. :?
 
M

myran

Guest
imported post

imported post

My mistake, thought you meant did I overtly do anything to change the gear ratio after swapping sprockets. And you sure hit the head on the nail about the highway. Not much fun even being on the highway now. But on the sidewalk...er, offroad I mean, she climbs like a monkey on crack. So a package arrived yesterday. From Keintech. Cardboard envelope, really.

DSC00442.jpg


DSC00444.jpg


DSC00446.jpg


DSC00447.jpg


DSC00448.jpg


DSC00450.jpg


As you can see, the carb looks the same when I was done. Much love and thanks to my boy for putting his X-Box down and holding the flashlight. By the time his mother was home from Tae Kwon Do the dining room table was clean, and a test ride was already down range. A little flat spot at low rpm, sort of a bogging, but very subtle, but I'm sure I will be able to adjust that out over time. Any thoughts or advice is, of course, always welcome. Now, I have to explain why the dining room smells like gasoline...
 

Buck

Moderator
imported post

imported post

Enrich the fuel mix by backing out the idle mix screw a quarter turn and try that... then fine tune from there.

Try a 14t sprocket for better results.
 
Top