DR 650 upgrades/ IMS tank ... seeking advice

sbruton

New member
Hi all,

I've been out of riding for a couple years, but officially got back into the game last night when I brought home a minty 2001 DR 650! :dr:

I've had a number of DS bikes (XT 350, KDX 220, KTM 640 Adventure) and I think this one will keep me happy for a while. I will be commuting on it occassionally and hope to get outexploring on the weekends. I'm looking forward to riding again!

The bike is bone stock and doesn't appear to have ever left the pavement! I'll eventually be putting on some extras such aspipe, skid plate, bark busters and an IMS Tank.

I'm wondering if anybody can recommend a good place to pick up/ orderan IMS tank OR if you know of anybody with one for sale?

Any thoughts on what are the "Must Do" upgrades?

Advice much appreciated!

Thanks.
 

RoscoeP

New member
imported post

imported post

I am in the same process right now. If your bike still has Bridgestone "trailwings" on it or deathwings as they are called get rid of them. They are fine for the pavement but not so good in the dirt. The bike is geared a bit high so a 14 tooth front sproket is a cheap fix for that. Higher/better handlebars with barkbusters may be more comfortable standing up on the footpegs. And the barkbusters may prevent a broken clutch or brake lever or hand!
I am also going to rejet and install a new exhaust and airbox mod. I am sure others will post up more useful ideas, enjoy!:p try Kein tech engineering or Thumpertalk on line plus DSBC store of course.
 

bmw rocke

Member
imported post

imported post

Congrats on the new (to You) bike. I had a 2001 dr650 and thought it was a great bike.

The list of mods I did and would recommend are.

- New progressive fork springs. These are a must for street and dirt. The difference they make is amazing and this should be near the top of the list.

-Dyno jet jetting kit. The kit has all the sizes you will need as you change pipes and do air box mods. This is handy for tuning as you do upgrades. I found that the bike ran really lean stock and had good power improvements with the jetting kit. A bonus is the bike ran a lot cooler with the richer jetting.

I put on a 14 tooth counter shaft sprocket but found that the bike would pull the stock gearing fine once the jetting kit was installed. This being said I changed back to the 15 tooth sprocket and was happy.

-Skid plate!!! The bike has fairly low clearance (compared to a full on dirt bike) and it will need the skid plate to protect the frame and motor from the nasty stuff. I found one on e-bay for cheap so I don't remember who made it. I do know that it had some good "wear" marks when I sold the bike:D.

I also put on some renthal bars. The bike will bend the stock bars really easily if it even tips over. Aluminum bars make sure you can keep riding after a get off.

I found the mitas tires worked well on the big DR but the rear brake has very little feel and will lock up with any Knobby easily. I changed to a softer rear pad and it gave the brake a better feel. I also put a steel braided line on the front and that improved the feel and stopping power there too.

Finally I got rid of the stock rear lights (Turn and brake). You will always be breaking off the turn signals. I put on a U.F.O. universal light kit and it worked well.

Hope this helps and if you have any other questions feel free to ask me. Rocke
 

Buck

Moderator
imported post

imported post

sbruton wrote:
I'm wondering if anybody can recommend a good place to pick up/ orderan IMS tank OR if you know of anybody with one for sale?

Got my Corbin seat and IMS tank 2 years ago from Adrenalin MC in Victoria. Best price locally at the time. www.adrenalinmotorcycle.com
 
Top