P
pancho del rancho
Guest
I've been at this one for a couple weeks now with the help of some local rider/mechanics and even though there are other local bikes set up the same and running strong none of us can seem to figure out my problem. Hope you can help. I live at sea level, Bellingham, Washington.
'05 DRZ400S
stock exhaust
3x3 airbox mod
Dynojet fuel screw, needle and clip parts (all properly
assembled as per the diagrams)
140 main
25 pilot
clip on the third notch from the top (tried the 4th first, didn't work)
Revs out through the top end real nice but idles poorly, bogs right off idle, and displays leanness in the form of a mean hanging idle that won't settle down until I turn the fuel screw almost all the way in to seated, and that's with the idle adjuster backed all the way off. It acts somewhatlikea vacuum leak but the boot from the carb is fine.Yesterday I pulled the carb for the fourth time, tore the whole thing apart and reassembled everything meticulously, but no dice. Burned said to make sure the tip of the fuel screw wasn't broken off in the carb, and it isn't.
Any advice at all would be much appreciated. .
Thanks
'05 DRZ400S
stock exhaust
3x3 airbox mod
Dynojet fuel screw, needle and clip parts (all properly
assembled as per the diagrams)
140 main
25 pilot
clip on the third notch from the top (tried the 4th first, didn't work)
Revs out through the top end real nice but idles poorly, bogs right off idle, and displays leanness in the form of a mean hanging idle that won't settle down until I turn the fuel screw almost all the way in to seated, and that's with the idle adjuster backed all the way off. It acts somewhatlikea vacuum leak but the boot from the carb is fine.Yesterday I pulled the carb for the fourth time, tore the whole thing apart and reassembled everything meticulously, but no dice. Burned said to make sure the tip of the fuel screw wasn't broken off in the carb, and it isn't.
Any advice at all would be much appreciated. .
Thanks