DRZ400S Handle bar conversion

scooter

New member
I would like a taller bar on the DRZ. Which bar will work without modifying the cables etc. 1" plus rise would be good.
 

sugar

New member
imported post

imported post

http://cgi.ebay.ca/Pro-Taper-Protaper-Handlebars-Pastrana-FMX-Mounts-Grips_W0QQitemZ320141548851QQihZ011QQcategoryZ35587QQrdZ1QQcmdZViewItem



I got the CR high bend, nice bars. A friend of mine has the Zeta's clamps, which bring the bars up a few inches. Nice for taller guys. Thumpertalk has lots of pics and tips for installing the bars. Have fun with the throttle tube if your changing your grips as well......(maybe a good idea to get heated grips while everythingis apart?dual-star.com, I love mine)
 

leadsled

Member
imported post

imported post

Handle bar risers on ebay. Made in canada:hb:. Andy was great to deal with. Easy install. I still need cr high bend bars on top of that.
 

scooter

New member
imported post

imported post

Thumper Talk had a good write up on bars and risers. Itsounds like the 1 1/8" bars lessen the vibration. Although I do not find the bike vibey.

I'm going to start off slow and cheaply. Rethal 7/8 Jimmy Button high rise bars ordered. About a 1' rise. Slavage the grips.

I will see what if anything is binding.

If more adjustment is need I will go with the risers. Then look into what has to be relocated. If you go with the up and forward risers the speedo has to be relocated.
 

leadsled

Member
imported post

imported post

I put on the "up and forward" risers on mine and no relocations were needed. I just tweeked the bracket a bit
 
M

markjenn

Guest
imported post

imported post

Happy with this setup:

DRZHandlebar.jpg


- Mark
 
Top