Group Buy: DRZ / KLX oil filters

skidmark43

Administrator / BFF in the blue jacket
I'm sick of paying the local dealers too much money for oil filters etc., and have decided to make a bulk buy of OEM filters (and oil change necessities) in the U.S.

I may have to declare these at the border, and will accordingly expect you to reimburse me for any taxes. I'm not doing an upcharge; this is what I'm paying.

PACKAGE:


4 OEM oil filters

4 Crankcase drainplug crush washers

4 Frame drainplug crush washers

1 Internal filter mount o-ring

1 Oil filter cover o-ring
​
$44.00 cdn

HoleShot charges $12.33 plus taxes for a filter & single crush washer, so + or - taxes this is a good friggin deal & should take care of a years worth of oil changes for guys like TT. Just add oil!!!!

I can add front sprocket fold-over washers to my order for $1.00 each (Holeshot $2.34 + taxes), Rear wheel bearing dust seals for $16.50 per set, and the front wheel bearing dust cover for $6.00.

Mark; 671-6934

Be nice; I'm neither a bank nor a friggin store. Just trying to share the deals I find...
 

tomcycle

Past President DSBC 2004 -2018
Staff member
imported post

imported post

Put me down for the package deal for 4 filters and 2 fold over washers for the countershaft sprocket.

Just let me know how you want me to pay

Good deal even if you get a discount from your local dealer.
 

skidmark43

Administrator / BFF in the blue jacket
imported post

imported post

What, no comment on the avatar?

Cash on delivery would be nice.

Bill signed on as well for the package deal & a sprocket washer; Ted just wanted filters ('cause he's especially gentle on crush washers & o-rings), but I'll charge him the same :D.

So even though I only offered two packages (& no substitutions) originally, I bent my own rules for our good friend Teddy.

So anyone else (Guy & Dave & JZ)? I'll make the order tomorrow am.
 
S

Starbucks

Guest
imported post

imported post

That avatar is mental! (again)

I say we go for a group buy of Scott's stainless filters for the DRZ / KLX

They last longer than the bike, they work better, they are totally reusable and are cheaper than 3 oem filters. In other words, it will pay for itself in 1-2 years and last forever after that....that scott's stuff issolid gold, the damper and TC I got from them are works of art.

I think this group order is a good idea, we all need oil filters...I just really strongly reccomend we look at the scott's stuff first. it is significantly better in every way over the OEM and other aftermanrket filters, and it is significantly cheaper. here's some specs from the site:



Oil Filters: Superior Filtration:
This should be the last oil filter you will ever buy! Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases. Most good paper filters will pass particles in the 90 to 95 micron range, and some tested, as much as 300 microns. Sand is about 125 microns and a white blood cell approximately 25 microns. Our stainless filter catches items down to 35 microns "absolute", which is about 3 times better than most good paper or brass filters. The pleat seam is welded, able to withstand up to 600 degrees in our filter, not glued, like paper filters.

Cleanable and reusable:
Simply remove the filter, rinse in clean solvent and replace it, you're done. The filter can be cleaned with solvent, kerosene, aerosol carburetor cleaner, or any other degreasing agent, even common dish soap. You can even blow air through the filter from the inside out to remove any small particles or cleaning agent from the screen if you so desire.

Consistent flow under all conditions:
Stainless steel will stand up to the stress of heat, high pressure and physical handling much better than paper or brass. This filter maintains consistent flow under all conditions including cold start ups and or under extreme heat. A one inch square of this micron filter material will flow 1.9 gallons of 90 weight oil per minute at only 1 psi pump pressure (70 degrees F). Our typical filter size is 30 sq. in. which equals the flow of 57 gallons per minute. Standard paper filters do not flow well when the oil is cold, often causing the bypass valve to open allowing unfiltered oil to enter your engine, uhg!

Unaffected by Water, Heat and Pressure:
This filter is capable of withstanding extremely high pressure and flow rates. It is also unaffected by Water, Heat and Pressure, unlike standard paper filter material which swells in the presence of water, closing off filter pores and reducing flow.

Early Detection:
By allowing you to inspect the debris that is in the filter you can monitor your engines condition, avoiding minor and or catastrophic failures.

What is a Micron?
A micron is one thousandth of a millimeter. That's about .00003937 inches. Fine sand can be as small as 62 microns thick. Our filter will not allow any particle over 35 microns to pass through this filter, that's some pretty small stuff that's being caught.

So who uses this type of filtration?
This high tech filter technology is widely used in all types of auto racing including NASCAR, Indy type cars, Formula 1 and in the Aerospace industry where filtration is of the utmost importance.

Things to think about:
Next time you are fanning your clutch think about all that tiny debris that is created from the clutch and gears meshing together, spinning around in your motor's vital parts. If you really care about the life of your motor and consider the cost of loss of time associated with a current day 4-stroke motor, then you need one of these filters. It's even transferrable in some cases to your next bike. I used the same filter in my last three bikes, and it's still like brand new, there's simply nothing to wear out.

Environmental benefits
In addition to all the other benefits, our filter helps keep the land fills free of old used filters.


I've dealt with Scott's on the phone a few times, they are great. I am sure we could get an order of these super-filters for about the same price as the OEM kits. These filters are around $75.00 Canadian shipped, but it's a lifetime filter that should prolong the life of the bike as well. I think we could get a "package" or "club" deal...they cutme a serious deal on shipping that saved me mega bucks and taxes last time...

All the feedback on thumpertalk sez they're the way to go...So Scott's is where its at.


http://www.scottsperformance.com
 

skidmark43

Administrator / BFF in the blue jacket
imported post

imported post

I've been using a metal filter in my coffee maker for years with great satisfaction.

:D:p:D

Industrial applications continue to use paper filters. Automobile / truck fleet operators would be 'on board' if the cost savings & performance truly existed.

I believe that the typical users of the metal filters are certain high-end automobile race teams (tear-downs after 1-8 hours of run time). I have no information on 'aerospace applications' as cited by Scotts.

The metal filters seem most effective at catching debris, which is great; but I suspect we are more exposed to water, acids & sludge. Test reports from a euro street bike mag cites higher oil pressures, which is a concern.

While my DRZ is long out of warranty, the fact that metal filters void warranties should set off alarms.

Good luck with using Scott's filters Jeff; on my machines I'll stick with oem paper filters.
 
S

Starbucks

Guest
imported post

imported post

hey I dunno, I just know all the yanks on thumpertalk can't shut up about how much they love these filters. My guess is that they are superior, I'd like to see a side-by-side test though. I am not sold on one technology or the other, only the feedback on these has been oustanding...hey if you do a run to the states, let's hook up.

I'll get the kit you want to get AND the Scott's and I'll do the DSBC review and test. I am a big fan of frequent oil changes--I'd like to swap the filter more often--but the pain in the ass factor and cost holds me back. Put me down for the kit, and seriously, I'll order up a scott's to a US rep close by, and we can try 'em both.

Bucks
 

skidmark43

Administrator / BFF in the blue jacket
imported post

imported post

I've followed the several dozen pages worth of ThumperTalk posts. There are a handful of posters that swear by the Stainless filters, and a handful of posters on the other side of the fence.

No tests or technical data pertaining to motorcycle applications. Interestingly, none of the cited users (Nascar, F1, Aerospace) seem to 'clean & reuse' the filters.

I have no doubt that the Scotts are well made filters Jeff.

I'm curious as to how you plan on cleaning yours without damaging the o-ring. How do you know if you've damaged the filter with a wash brush, etc.? How do you know if you've actually got it clean (it's designed to trap microscopic particles)?

I like to get my oil changes done quickly; toss the old filter & install a new one. You get to spend more time cleaning & rinsing the Scotts filter, and then leave it overnight to dry thoroughly before re-installing. Now that is a true pain in the ass.

Regarding costs, your Scotts filter is likely coming in for C$70.00. The oem filters cost me $9.00 on this latest 'group'purchase.I use high end oil, and change the oem filter with every second oil change; lets say 3 times a year. So it would take me 2+ years to recover the cost of the 'permanent' filter... And it would likely be due for replacement then anyway (o-ring, etc.).

I'll stick with the convenience & proven reliability of oem, and invest in quality oil.

My bulk order was processed last week; sorry that you missed it.
 

skidmark43

Administrator / BFF in the blue jacket
imported post

imported post

Don't know what you mean by "let's hook up". (I don't know what you have in mind Homer but you can count me out) Not that there's anything wrong with that, but, uh, no.:D

I'll be in 'merica tomorrow, God willing.

Glad you like the new avatar.
 
S

Starbucks

Guest
imported post

imported post

Hey man, whatever works is great. I was hoping we'd get to see how these two systems work side by side, but no matter. Today was the first day I saw your post, sorry I missed your order. Obviously, I use the OEM filters and think they're great. I just heard that these were better...perhaps...we will not know for a while.

I would say that cleaning and washing this system without harm would seem to be a breeze. After all, I did pass a few "white-glove and dental pick" tests whilst stripping,cleaning, and rebuilding$75,000.00 machine guns, etcfor about four hours a day, 16 weeks. I would say that it is quite easy to strip, clean and replace this simple device, properly kitted out in about 1/2 hour. Just use an appropriate solvent, or use what we did for such delicate parts...Immerse them in a sink of hot soapy water and clean with a sponge or soft scrub brush. In fact, if you have a sink with good hot water flow, you can use the hot water to blast oil the carbon and oil after a thin coating of dish soap. Wash each peice at a time in order. You'd never even need to touch them with anything other than your hands with this technique, hot water will boil out just about all carbon and oil fouling due to the expansion and pores in the surface of the metal. The hot water will bleed out all bad junk, and since the filter is stainless, this is the most rational way to clean it.

Bang dry, blow dry, heat at 200 degees farenheit in an oven for about 2 mins., put them in front of an oscilating fan, heat in pot on stove wrapped in dry cloth on low heat,whatever, etc.Steel doesn't retain water. In fact, if you immerse it in extremely hot rise water, there is no need to dry. The transferred heat to the metal will self-dry the item in about 5 mins on a countertop.

As for price, if the Scott's works as advertised, or even as good as paper, it would be the most economical choice due to its lifetime guarantee. I think $70.00 would be reasonable for such technology to be delivered to my door without a border run.

I've got the mechanical skill but not the sort skill requiresfor ideological debates in motorcycles; for example one tire VS another, different jetting set-ups, pipes, which oil or filter or suspension is best. My axiom has always been to simply do what works. I hope you don't feel I was criticising your decison to buy paper filters--of course I use them. In fact I want to be in on the next order. I just thought it might be nice to try something new. After all, what else is there to strive for but progress?
:hb:Bucks

PS: And what is it with this homosexuality stuff that keeps going on on this board? Why is everyone talking about it and joking about it, I don't get it...?
 

skidmark43

Administrator / BFF in the blue jacket
imported post

imported post

Starbucks wrote:
After all, what else is there to strive for but progress?

:hb:Bucks
I can think of something, but the moderator might bump me to the doghouse.;)

And I thought I saw a '.' after the word 'stripping' in your post, which made me re-read it...

BTW, sounds like your cleaning process will be great - but what a pain in the ass vs. tossing the oem filter in the recyclng bin!

The Scotts instructions say not to dry with compressed air & to leave overnight (I assume for moisture around the o-ring?).

No offence taken Jeff. Great debate.
 

skidmark43

Administrator / BFF in the blue jacket
imported post

imported post

How many times are you going to edit?

Not that there's anything wrong with that...
 
S

Starbucks

Guest
imported post

imported post

Good research dude, speed of light.

Bucks
 
Top