Husa mechanic

[TroUtman_888]

I'm looking for someone that specifically wrenches Husabergs in the Lower Mainland. Got an 08 FE 450 with coolant issues. International replaced the water pump seals and bearing but still leaks from weep hole. Mechanic thinks it's the shaft being badly scored. I tried to order the part, but they no longer will source out Husa parts. They were really good about it and only charged me for a tune-up as they could not rectify the problem.
I've read several threads in Husa.org about this issue so I'm wondering if there's someone out there that knows these bikes and this issue - and could handle this problem. I'm not that adept mechanically to even try )

 

[Shuswap]

Maybe you can get a part number from here and source the parts yourself
https://www.husabergshop.se/documents/00669_Reservdels_manual_Motor.pdf

 

[TroUtman_888]

Thanks Shuswap

 

[filterwrench]

djhcyclesport.com

 

[Tree]

Not on the lower mainland. But Victoria is close. Adrenalin Motorcycles or Kenco in sooke. Top shelf guys who both deal with Husaberg lots.

 

[Captain Excellent]

I had my 2010 390 piston replaced by Motoconcept in North Van this past winter / spring. The mechanical work was good (so far) but electrical I asked to have fixed was a little underwhelming.