KLR 650 slowly getting it how I want it.

G

Guest

Guest
I have slowly puttered away at things on my bike.

Installing the lower gearing made a HUGE difference....It maybe is not geared now to cruise at 150 all day long, but I never did that anyways...and it is still as fast on the top end as before, it now just will hit redline in 5th, which it could not do before.

Also did adjusting the pilot screw in the carb out from its original 1 turn from seated to about 2 1/4 turns now....bike will wheelie at will now.

It looks like crap, but to make it more comfy for an upcoming long trip, I cut up a blue sleeping foam for camping and duct taped it to the seat....Feels great on my sore butt, although the eye appeal is extremely low.

Mounted my new tail bag from the local Kawi dealer, part # K99994-501
 

joker650

Active member
imported post

imported post

It looks like crap, but to make it more comfy for an upcoming long trip, I cut up a blue sleeping foam for camping and duct taped it to the seat....Feels great on my sore butt, although the eye appeal is extremely low.


hehe....I better bite my tongue;)
 

eagleguy

New member
imported post

imported post

come'on , you"re the joker. what were you thinking? 10 days til we ride. cheers
 

Yak_KLR650

New member
imported post

imported post

joker650 wrote:
It looks like crap, but to make it more comfy for an upcoming long trip, I cut up a blue sleeping foam for camping and duct taped it to the seat....Feels great on my sore butt, although the eye appeal is extremely low.


hehe....I better bite my tongue;)
You're right Joker. An easy one right over the plate - no challenge to hit that one out of the park!

What the heck. Mcfly - you talkin' about the MOTORCYCLE seat?:mb:
 
G

Guest

Guest
imported post

imported post

joker650 wrote:
It looks like crap, but to make it more comfy for an upcoming long trip, I cut up a blue sleeping foam for camping and duct taped it to the seat....Feels great on my sore butt, although the eye appeal is extremely low.


hehe....I better bite my tongue;)
I had to toss you an easy one Joker, as a hard to put together comeback would have been over your head.;)
 
G

Guest

Guest
imported post

imported post

Yak_KLR650 wrote:
joker650 wrote:
It looks like crap, but to make it more comfy for an upcoming long trip, I cut up a blue sleeping foam for camping and duct taped it to the seat....Feels great on my sore butt, although the eye appeal is extremely low.


hehe....I better bite my tongue;)
You're right Joker. An easy one right over the plate - no challenge to hit that one out of the park!

What the heck. Mcfly - you talkin' about the MOTORCYCLE seat?:mb:

ERRRRRRRRRRRRRRRRRR

I plead the fifth......................
 
K

KelKen08

Guest
imported post

imported post

mcfly wrote:
Also did adjusting the pilot screw in the carb out from its original 1 turn from seated to about 2 1/4 turns now....bike will wheelie at will now.
I have to do this...was it pretty easy?
 
G

Guest

Guest
imported post

imported post

KelKen08 wrote:
mcfly wrote:
Also did adjusting the pilot screw in the carb out from its original 1 turn from seated to about 2 1/4 turns now....bike will wheelie at will now.
I have to do this...was it pretty easy?

Very very easy....maybe 5 minutes at most to do.



Cut this off with a hacksaw blade....yes, you need to remove the blade from the hacksaw and just use the blade in hand wearing a glove to protect your fingers.
 

Attachments

  • carb after cutting.jpg
    carb after cutting.jpg
    78.2 KB · Views: 0
G

Guest

Guest
imported post

imported post

Then using a screwdriver bit ( I used the smallest one here and just turned it with my fingers, as NO room for a screwdriver in there.

I seated the screw, and then backed it out.

I started at about 1.5 turns out, and kept going till I deemed it perfect which was about 2.25 turns out.

It was roughly one turn out from the factory, and way too lean.
 

Attachments

  • screwdriver bits..jpg
    screwdriver bits..jpg
    50.5 KB · Views: 0
G

Guest

Guest
imported post

imported post

joker650 wrote:
It looks like crap, but to make it more comfy for an upcoming long trip, I cut up a blue sleeping foam for camping and duct taped it to the seat....Feels great on my sore butt, although the eye appeal is extremely low.


hehe....I better bite my tongue;)
Here ya go Joker, its a thing of beauty is it not..................
 

Attachments

  • seat & bag.jpg
    seat & bag.jpg
    92.8 KB · Views: 0
Z

ZED

Guest
imported post

imported post

mcfly wrote:
I have slowly puttered away at things on my bike.

Installing the lower gearing made a HUGE difference....It maybe is not geared now to cruise at 150 all day long, but I never did that anyways...and it is still as fast on the top end as before, it now just will hit redline in 5th, which it could not do before.

Also did adjusting the pilot screw in the carb out from its original 1 turn from seated to about 2 1/4 turns now....bike will wheelie at will now.

It looks like crap, but to make it more comfy for an upcoming long trip, I cut up a blue sleeping foam for camping and duct taped it to the seat....Feels great on my sore butt, although the eye appeal is extremely low.

Mounted my new tail bag from the local Kawi dealer, part # K99994-501
Neat to hear the blue foam works. I've considered trying it.

Wheelie at will? Wow! My '05 can occasionally power wheelie under acceleration in first, but not much. It'll be interesting to see what that might do to your fuel consumption. What are you hacksawing in the picture you posted? It's not obvious.
 
K

KelKen08

Guest
imported post

imported post

Thx Mcfly..I ran out and did it right away...so much smoother power now..no poppin gets up to 120 k's faster...Im likin it. :clap:

Oh and I seen some other threads on this and guys were truning the carb drilling a small hole and popping out the end cap...your way is way easier..I only had to lossen the carb and turn it a tad bit to get the screwbit on it..:tup:
 
G

Guest

Guest
imported post

imported post

ZED wrote:
mcfly wrote:
I have slowly puttered away at things on my bike.

Installing the lower gearing made a HUGE difference....It maybe is not geared now to cruise at 150 all day long, but I never did that anyways...and it is still as fast on the top end as before, it now just will hit redline in 5th, which it could not do before.

Also did adjusting the pilot screw in the carb out from its original 1 turn from seated to about 2 1/4 turns now....bike will wheelie at will now.

It looks like crap, but to make it more comfy for an upcoming long trip, I cut up a blue sleeping foam for camping and duct taped it to the seat....Feels great on my sore butt, although the eye appeal is extremely low.

Mounted my new tail bag from the local Kawi dealer, part # K99994-501
Neat to hear the blue foam works. I've considered trying it.

Wheelie at will? Wow! My '05 can occasionally power wheelie under acceleration in first, but not much. It'll be interesting to see what that might do to your fuel consumption. What are you hacksawing in the picture you posted? It's not obvious.

I noticed no real diference in the fuel mileage and have done about 450 kms since doing the adjustment.

If you look at the bottom of the carb, right at the front above the starter motor, you can see a piece that has a crooked cut ( and I was sober, darn I must shake a lot )

It has a plug in it to keep you from adjusting it.

I just cut the bottom off as the screw is a ways up inside there.

If I had to guess I cut off maybe 3 millimetres total, and yes that includes the actual cut itself.

The reason its so much snappier is a combo of adjusting the carb, and the drop of a tooth on the countershaft sprocket....the thing stock is geared for top speed, and I do not ride on the salt flats, so its useless to me like that....although it will do 175 kms/hr no problem ;)
 
K

KelKen08

Guest
imported post

imported post

ZED wrote:
mcfly wrote:
I have slowly puttered away at things on my bike.

Installing the lower gearing made a HUGE difference....It maybe is not geared now to cruise at 150 all day long, but I never did that anyways...and it is still as fast on the top end as before, it now just will hit redline in 5th, which it could not do before.

Also did adjusting the pilot screw in the carb out from its original 1 turn from seated to about 2 1/4 turns now....bike will wheelie at will now.

It looks like crap, but to make it more comfy for an upcoming long trip, I cut up a blue sleeping foam for camping and duct taped it to the seat....Feels great on my sore butt, although the eye appeal is extremely low.

Mounted my new tail bag from the local Kawi dealer, part # K99994-501
Neat to hear the blue foam works. I've considered trying it.

Wheelie at will? Wow! My '05 can occasionally power wheelie under acceleration in first, but not much. It'll be interesting to see what that might do to your fuel consumption. What are you hacksawing in the picture you posted? It's not obvious.
Zed look on the lower right hand corner of the carb...the small cylinder shape its a bit jagged after cutting it off...I only cut off maybe a 16th of an inch and half way across the end cap popped off...I loosened the clamps and turned the carb a tad to get in to do the adjustment...marked the bit and did 2 1/4 turns like mcfly easy as pie :hb:
 
K

KelKen08

Guest
imported post

imported post

Haha I cant wheelie too well yet on this thing..Ive done one straight up for a bout 20 feet and lots of little 2 footers...but its much smoother and revs seem a wee but quicker....all good for the first thing ive done...sprocket maybe next too :tup:

Oh and mine was set 1/2 turn...not good :spl:

Maybe a guy should put a dap of some blue stuff in there to protect it or somehing :cool:
 
G

Guest

Guest
imported post

imported post

KelKen08 wrote:
Thx Mcfly..I ran out and did it right away...so much smoother power now..no poppin gets up to 120 k's faster...Im likin it. :clap:

Oh and I seen some other threads on this and guys were truning the carb drilling a small hole and popping out the end cap...your way is way easier..I only had to lossen the carb and turn it a tad bit to get the screwbit on it..:tup:

Also read several threads with idiots drilling it out, having the bit go in to far and slam the air screw under the cap.

All sorts of reasons NOT to drill it, but just cut it off.

It truly is a 5 minute job, and the bike runs so much better I almost thought it was a different bike....wow what a difference.:dr:

No noticeable decrease in mileage either....now it just pulls harder, smoother, and no annoying popping sound.

Also starts way better....I now start it in the morning just using 3/4 choke, not full choke...should be much better once it cools off this fall. :D
 
G

Guest

Guest
imported post

imported post

KelKen08 wrote:
Haha I cant wheelie too well yet on this thing..Ive done one straight up for a bout 20 feet and lots of little 2 footers...but its much smoother and revs seem a wee but quicker....all good for the first thing ive done...sprocket maybe next too :tup:

Oh and mine was set 1/2 turn...not good :spl:

Maybe a guy should put a dap of some blue stuff in there to protect it or somehing :cool:
Yikes only a 1/2 turn out....that is spooky lean :hr:
 
K

KelKen08

Guest
imported post

imported post

mcfly wrote:
KelKen08 wrote:
Thx Mcfly..I ran out and did it right away...so much smoother power now..no poppin gets up to 120 k's faster...Im likin it. :clap:

Oh and I seen some other threads on this and guys were truning the carb drilling a small hole and popping out the end cap...your way is way easier..I only had to lossen the carb and turn it a tad bit to get the screwbit on it..:tup:

Also read several threads with idiots drilling it out, having the bit go in to far and slam the air screw under the cap.

All sorts of reasons NOT to drill it, but just cut it off.

It truly is a 5 minute job, and the bike runs so much better I almost thought it was a different bike....wow what a difference.:dr:

No noticeable decrease in mileage either....now it just pulls harder, smoother, and no annoying popping sound.

Also starts way better....I now start it in the morning just using 3/4 choke, not full choke...should be much better once it cools off this fall. :D

I really want nerf bars before I get to crzy on the dirt and a top bag like the givi with the pad for the wife and store my Helmut :tup:

Whatever else will be waiting for mext year...to many thing to buy when renovating...new overhead micro wants its on wire :X

get ready for hockey :dr:amd other cotly things...such is life...but I'll have her done up right for me when im done...why haveit all right away.guys get to much then regret some later already seen lots not happy....Im already so addicted------point to KLRAA ok---------->:talk:
 
Z

ZED

Guest
imported post

imported post

Thanks folks. I see it now. That does sound easy, and with no apparent draw backs. I should try it. 175kmh you say. Wow! Mine tops out around 157 with stock gearing.

As for nerf bars, they are worth the time and money in my mind. A simple no-speed crash on the wrong shaped bump on the left side can make short work of your radiator.:shock:
 
G

Guest

Guest
imported post

imported post

ZED wrote:
Thanks folks. I see it now. That does sound easy, and with no apparent draw backs. I should try it. 175kmh you say. Wow! Mine tops out around 157 with stock gearing.

As for nerf bars, they are worth the time and money in my mind. A simple no-speed crash on the wrong shaped bump on the left side can make short work of your radiator.:shock:

NOTE: KLR speedos are highly optomistic....so yes it says 175 kms/hr....in reality, make a guess how fast it really goes....I have had my pal who swears his street bikes speedo is accurate, ride beside me and clock me at 163 kms/hr....it has another 1 or 2 kms /hr in it if the straight stretch is long enough.....the GF is no longer allowed to read anything on this site, as she gets pissed if I ride a tad quickly. :(
 
Top