KLX400SR swing arm grease nipple?

Revnelli

New member
Hi People,
As I was farkling on my bike I noticed a screw on the swing arm (above chain in photo). It has a cross head screw. It is not in the clymer or drz manual, nor on any fiche I can see. I'm hesitant to unscrew it (if it aint broke don't fix it). Anyone got any knowledge/suggestions.:confused:
IMG_0188.jpg
 

250ccforme

Member
It holds on the chain slider? If you do try to take that screw out be careful if it's tight, it's not a Philips, it's JIS. Slightly different, the Philips driver will try to spin out if the screw is at all tight.
 
Last edited:

Revnelli

New member
It's not on the chain slider - there's a feature formed into the metal of the swing arm - the screw goes deep into the swing arm itself - That's what makes me thing there may be a channel for grease under the screw. But thanks - I will be v carefull when (if) I try to undo it. There's also a lot of dirt built up around it which need to be cleaned off.....
 

Revnelli

New member
Duh, Apologies and props to 250ccforme, It *does* hold on the chain slider. I'm going to have to work on this "seeing" thing.
 
Top