imported post
imported post
JavaJude wrote:
There was afellow that I know that was told not to use the Kouba Links and that if he wanted to lower the bike he should get a"professional" todo it for him. I think he was quoted about $600-$800 to get it done. That's another route that you can take. I'm not a hard-core rider and I don't think that I'm doingdamage to mybike. I am aware thatmy bike does bottom out if I take things too hard so Idon't.
-Judy-
Hi Judy,
I think that I'm that guy. I was quoted about $600.00 by RMR Suspensions to do the job correctly(professionally). This included new springs front and rear, also shortening of both front springs and rear shock. From what I can gather the problem is that the Kouba Links alter the amount of mechanical advantage on the spring,meaning that for a given riders weight a heavier spring will be required to work correctly.
Now I am lucky, and cheep. I checked the stock spring rates on an on line calculatorand have found that at my light weight ( 140lbs wet) that the front springs are the right rate. The rear spring is slightly on the heavy side. I am hoping that I can add Kouba Link 1 or 2 and be able to set up the race and static sag to within spec. I will add a 1" bar riser and move up the forks on the front to compensate for the lowered rear.
For a great explanation of static and race sag set up go to thumpertalk.com, there is a really good description of the proceedure with pictures and all.
Bottom line, use the links but set up the suspension to spec and it should work. If you are super agressive and expect to ride like a MX'r spend the big bucks and have it done professionally.
Thats my plan, I hope that it works as planned. Lots of info and advice available online, it just takes some time and patience to find it and filter out the fluff.