New to the dual sport world

Mr. Sleazy

New member
Hello, Dual sporters!

I am now the proud owner of a new-to-me 2000 DRZ 400s, just bought it today. Haven't plated it yet, it can sit at my brother's place up in Whistler where I can practice on easy trails until I complete my motorcycle course. I was puttering around the trails there thisafternoon, at first I was wondering "what the hell have I gotten myself into", but after a half hour or so I realized if I went slow and easy and stayed on the easy stuff I would be fine. Passed some old ladies hiking on the trail and I wasn't going much faster than they were.

Looking forward to running it up into the mountains, and commuting to work in Vancouver. Check out the photo, not much to look at yet. Pretty well bone stock, which is what I wanted. Now if you don't mind I'll be pumping you full of newbie questions. Here is a sample:

1. Anyone have a tail rack or pannier racks they want to part with for some cash? I want to use the bike for some backroads touring and camping, also commuting, so I definitely need some carrying capacity. Ordering all this stuff from happy trails will be $$$$mucho expensive. Yikes.

2. Would anyone care to recommend a good shop in Vancouver for any ongoing maintenance I might have?

3. A long shot but does anyone have a pdf of the owner's manual?

Definitely looking forward to running this bike. I have been a mountain bike tourer for years but now decided a motor is a really good idea. I have lots to learn but am of the age where I don't care if I ride like an old lady so long as I don't have to visit the hospital.

Cheers!



Check out the bike, not much to look at just a stock 2000 DRZ:
 

Attachments

  • drz400s.jpg
    drz400s.jpg
    30.6 KB · Views: 0

Yak_KLR650

New member
imported post

imported post

Welcome Sleazy.

I made up some pannier racks for my KLR - simple and light. do a search of the forums for "Panniers". They use bicycle panniers (which it sounds like you already have).

Don't know about shops in Vancouver, but I've had fun learning how to do a lot of my own maintenance (I don't even change my own oil in the cars!). It'll give you some more knowledge to help you when something goes wrong in the bush, a long way from any shop!
 

SubMann

New member
imported post

imported post

I see that you have a good bash plate and bark busters, both a requirement for offroad protection.

I would recommend case savers from thumpertalk or some other source. This will stop the shift or brake lever from putting a hole in your case if you fall over. Also check the case side of the shift lever. It probably has sharp edges. You should file these off so that it wont penetrate the case as easily.

In fact just go hear and read. They know more than me!

http://www.thumpertalk.com/forum/showthread.php?t=207448

Good luck and welcome to the DRZ gang.
 

malachi

Member
imported post

imported post

Welcome, and a great choice for a dualsport....the best in my opinion...but then again I am biast:DI have an 04 model....:hb:
 

Mr. Sleazy

New member
imported post

imported post

Thanks for the replies. You are right, SubMann, and I will follow your suggestions. The thumpertalk forum is chok-a-blok full.

I just took my first 3 hours of motorcycle safety course, figured out some stuff that should have been obvious to me as a mountain biker. The biggest one was "look where you want to go, not at the ground, because you are going to end up going where you look". My low speed turns sucked until I figured this one out.

I ordered a happy trails rack and some 1520 pelican cases for the bike, and will have fun putting the bunch together so I can commute to work in the rain in Vancouver, and then later on do some back-road touring. I am going to set up the cases something like this:

http://www.advrider.com/forums/showthread.php?t=92821

That dude used cheaper pistol cases instead of pelicans, but it looks good.

I am wondering for the pelicans whether to just basically bolt them permanently to the racks, or should I go all techie and try to develop some kind of quick release / locking mechanism. Sure would be easier to just bolt them straight on....
 

Norm

New member
imported post

imported post

I'm considering replacing my KLR650 with something lighter and more off road capable. Given my age and short inseam the KLR can be a real handful however it is hard to beat for logging roads and longer highway. Fairing and windshield are mandatory and I run an E450 Givi trunk, Happy Trails panniers and carry a pretty extensive tool kit.

I'm wonderinghow the DRZ400 compares, or would compare with a larger tank and more road-worthy seat?

I like that the DRZ weighs about 100 pounds less and seems to have a more modern suspension.

How does it compare power wise on the highway and low speed?

Norm
 
P

Pelican

Guest
imported post

imported post

welcome sleazy...I have a '00 DRZ as well...and I am loving it. I also recommend the case covers, from thumper talk or elsewhere...the stock case is super fragile, as you can see in a thread that I started here. Nice looking ride! If I ever figure out how to post pics, I'll post my Suz...
 
C

caribootom

Guest
imported post

imported post

With respect to your mounting options I would propose that you construct some type of system that allows your to remove them when you do not need to carry all of the additional gear. First of all it will allow you to expand your riding areas and second it will allow you to enjoy the bikes full potential. I saw a setup on a DR650 last week that is very similar to you situation. The bottom bracket is the same however the top bolts had large grab handles (ie 50 mm diameter) attached to the nuts. The bolts entered the case from the back and the lock nuts were on the inside of the case. The owner advised that he purchased the nuts at home depot. I hope that this gives you some additional ideas.:dr:
 

Mr. Sleazy

New member
imported post

imported post

Hey thanks for all the replies:

Norm: I haven't even ridden my own bike yet to know much about it, let alone how to compare it to the KLR. I would only end up parroting whats already been said online about both bikes. Basically, I got the DRZ to be a "barely street legal dirt bike", while the KLR is more of a 50/50 mix. I don't expect miracles out of my machine on the highway.

Pelican: Case covers sounds like a good idea. Why would the bike be made with such fragile cases, seems like a no-brainer.

caribootom: Yes your idea sounds good with the pelican cases, that is what I will end up doing. I think I could get all I need from Home Despot, so that should work out OK. I am going to want to commute to work in the rain and also head up to Squamish with a full load of climbing gear, so secure and easy cases are a must.

BP
 

malachi

Member
imported post

imported post

The case guards are made of magnesium which is really light weight. Alot of bikes use different metals to save weight. I have CFC case savers on my bike, they're stupidly easy to attach ( with black permatex goop) and have already save my right side case. I have a nice dent in my case saver....but my case is solid:tup:Magnesium is really hard to fix, even though alot of DRZ riders have repaired theirs with a liquid metal type of repair. I can't remember the name though.
 

Yak_KLR650

New member
imported post

imported post

If you do crack a case and get stranded in the bush, Magnesium filings burn really well! Great for starting a fire with wet wood. :ted:
 

Mr. Sleazy

New member
imported post

imported post

Hey thanks for all the feedback:

I just went and took my Motorcycle Skills Test today. Passed with flying colours, no mistakes. Test was not a big problem, I just had to be well-practiced at low speeds and make sure to listen carefully to the test supervisor. Now I can hit the road and trails sans supervisor! Will ride to work tomorrow for the first time ever....

Malachi and Yak: I alreqady ordered the CFC cases. Then when having a very close look at the bike I found a small oil leak which at first I thought was coming from the magneto cover gasket. But after a thorough cleaning and a strong flashlight, I found an old "ding" in the case which had been patched and is now leaking oil..... used bike #$Y(@*$&.

So now I have ordered a new left case as well as some tools from BikeBandit. Its a small leak and should be fine for now, but it will be good to change out the case and put the covers on there. Those cases sure do seem wimpy.....
 

Mr. Sleazy

New member
imported post

imported post

Update:

I have now had a week of commuting to work on my bike, which has been great except for last Wednesday which was horrible horrible horrible. My rain system is just a good-quality yellow rubber rainsuit overtop of a summerweight bike jacket (w armor), helmet with visor, and neoprene gloves. Rainsuit rolls up and sits on the fender all the time so I am never without it.

(this is turning into a blog-type thread someone tell me to shut up!)

Today I left work early and took it up onto Cypress Mtn to ride some of the dirt roads up there, and had it up to 110 on the Upper Levels Hwy.... wow that is some windy ride! Took it on the dirt (nothing difficult) and basically figured out that the DRZ is a mountain bike with a 400cc engine.
 
Top