Should Changing A Tire Be That Hard?

D

DjG

Guest
So I fixed my tire today... it only took about 2 hours:shock: (the chunk ofsteal sticking out was a4 inch finishing tappet, it even dug into my rim) When I finally realized there was a kind of seal that needed to be broken I got the first side out fairly easily. It was putting it back in that was the real pain! It took about 3 tries till I figured out a good method. But should the sidewalls sound like they're ripping when you get to those last 10 inches or so and it's stretched super tight? Right at the end I did finally figure out if you press down on the tire around the tight spot, it works better :cool:



-Greg

 

ktmken

New member
imported post

imported post

No. It shouldn't be that hard. The key is to make sure that the beads of the tire opposite to where you are prying are down as far as they can go inside the rim. and take small bites as you are prying, maybe 1" or less at a time. And a tire lube goes a long way to making it easier.

Wow , that is harder to explain than I thought. Help me somebody!

Next time I do a tire change I am posting pictures.
 
6

640in604

Guest
imported post

imported post

Ken, next time I change the skins I'll ride on up and you can use my bike for your pics! ;) I'll buy the :hb:.
 

ktmken

New member
imported post

imported post

Sounds good.....Lets wait a bit though....it is still stinkin cold here!!
 
S

Sabre

Guest
imported post

imported post

Speaking of "stinkin' cold," a tire change is much easier if the tire is WARM!

I let mine sit for a couple of hours in my boiler room, then do the change in a heated garage. The rubber is MUCH easier to work with!

Cheers!:hb:
 

joker650

Active member
imported post

imported post

Ken,,,, I am getting tires in the next few weeks also.

Will you change mine to?:dr:

The local Suzuki dealer here in Kamloops, River City Cycle, mounts the tires for nothing if you buy the tire from him. He seems to have the best prices on tires around here.

Just Give'r!

Joker:cool:
 

ktmken

New member
imported post

imported post

Hey you guys. I think that the offer on the table is to take pictures of someone else changing tires. If anyone wants to come to Kelowna and change tires, I will take pictures. :cool:

Looking forward to doing some riding.

Ken
 
D

DjG

Guest
imported post

imported post

ktmken wrote:
No. It shouldn't be that hard.  The key is to make sure that the beads of the tire opposite to where you are prying are down as far as they can go inside the rim.  and take small bites as you are prying, maybe 1" or less at a time. And a tire lube goes a long way to making it easier.

Wow , that is harder to explain than I thought. Help me somebody!

Next time I do a tire change I am posting pictures.


Clear as Mud! :D - Actually, that was a damn clear description. I'll throw the tiers some place hot AND push down on the opposite bead... maybe then I can do it with my bare hands!
 
Top