Test ride DL1000

ktmken

New member
I was over at VMS in Kelowna getting my brake recall done and I asked if I could take a DL1000 out for a spin while I was waiting.

I got a used DL1000 Suzuki V-strom and here are my impressions.

139142060-M.jpg


I really liked it. It felt very much like the BMW GS1200 that I rented in Victoria. It had lots of power and was very smooth. The wind noise was very close to that of my 950, Maybe just a touch louder, but I did not get the helmet buffeting like I did on the BMW.

My 950 has a more dirt bike feel to it, but if I had to slab it across Canada, I think I would rather be on this Suzuki over my 950. Then again, If I was taking gravel and dirt roads across Canada, I would definitely take the 950.

A nice feature was the top box which will fit a full face helmet. I liked that!

139145354-M.jpg


I had always wanted to try a V-strom and I must say that I was impressed. I don't know what the 650 V-strom is like but I can assume that it would feel a lot lighter.

Would I buy one? Yes, but I don't think mine would see a lot of dirt. Gravel roads maybe, but it would be a real handfull in the dirt.

This bike is for sale at Valley Moto Sport. I don't know what year it is and I don't know how much they are asking. I just thought I should put a plug in for them. They are a great bunch of people.

139142187-M.jpg




By the way the brake recall takes about 1 1/2 hours and there was no charge to me.

KTMKen in sunny Kelowna
 

joker650

Active member
imported post

imported post

This bike is for sale at Valley Moto Sport. I don't know what year it is and I don't know how much they are asking. I just thought I should put a plug in for them. They are a great bunch of people.


Well ....atleast you know it's a SUZUKI buddy:tup:



hehe...thanks for the report. I would like to try one of those out also.



A few weeks ago I was in Windfield.....looked for your place of work but couldn't find the place:(. Maybe I was going to buy u lunch or sumptn .....guess we will never know:cf2:
 

ktmken

New member
imported post

imported post

joker650 wrote:
A few weeks ago I was in Windfield.....looked for your place of work but couldn't find the place:(. Maybe I was going to buy u lunch or sumptn .....guess we will never know:cf2:

If at first you don't succeed. Try and try again.....:cf2: :)
 

nvdrzboy

New member
imported post

imported post

looks good, but I see two for sale on the website, one for $8699 and the other $9695, so what's the difference other than maybe a couple thousand kms and the cheaper one has a back rest?

Hmmm this is tempting as I'm debating something bigger than the drz and more street oriented (I'm sticking to dirt roads, some decommissioned logging roads, and the like, no single track gnarly stuff)...
 

nvdrzboy

New member
imported post

imported post

called and spoke to James at VMS this morning, there's only one bike, the other is an old picture; sounds like someone from Nanaimo is planning to check it out / purchase tomorrow, however, they took in an 04 DL650 yesterday, very clean ~ 33000 km - asking $7495? too many kms for me when brand new is $8999.
 

klrman

New member
imported post

imported post

We just ordered 2 DL-1000's:hf: Our local dealer cut us a great deal so it was
not worth picking them up in the states. Deliver will be Wednesday. They don't have much color choice so we got black silver. Want to bolt the goodies to look like the 1000 in the pic below to the left. This is going to be a fun Winter.:hf:
 

Attachments

  • dl1000.jpg
    dl1000.jpg
    121.3 KB · Views: 0

scooter

New member
imported post

imported post

I have owned both DL's. The 1000 has a more quality feel then the 650. I guess because they have to put better components on to handle the torque. Not off road enough for me so I purchased the DRZ. Protect the bottom of the motor and the oil cooler lines if you take it off road. Very vulnerable.

For the price its a great bike. Although Suzuki still sticks with the pitiful 2 pot Toiko's. At least put the 4 pot Toikos off the SV1000 on.
 

klrman

New member
imported post

imported post

I guess we chose the 1000 for easy touring but still with the ability to take off the hwy with no regrets. Just can't convince ourselves to get a full blown road bike for some reason.. Too much DP DNA in us I guess. Something about the broad torque curve of that motor that is so apealing. Would not take the V-Strom everywhere I take my KLR, but that is why I have the KLR. Except for a few little spots, the V-Strom will be able to go everywhere I have went with the KLR but slower as no use dropping such a fine machine! Thanks for the tip on the 4 pots as I heard the 2 pots are just adequate. Was always wondering why so many people get GS's and KTM950's and now I underdstand as it hit me too lately.....the need to go much longer distances a little more relaxed. What is really nice about the 1000 is that so many people are averaging 55+ mpg on them. That is what is so good about a motor
that puts out 98hp and still can get KLR mileage.
 

scooter

New member
imported post

imported post

I do have some parts left over. Gelled seat, Tank bra, shift lever, K&N Filter, back pad for top box.

If your a big guy one of the cheapest mods is to put a 5 mm spacer in the rear shock.

I always found the ride softv and Wallowy on the VS.

I have the dimensions some where for the spacerand if you need it made I could do that.

If you put crash bars on it watch for the welds cracking at the mounts. The motors are a little vibbey around 5500 RPM.

I own SV1000S also, besides a DRZ.

I think the Metzler Tourances were the best wearing tire for the V-Strom. Good grip too.

The big trailes are great for touring. Those Elephant Testical bags Kappa are great.
 

klrman

New member
imported post

imported post

Would be vey interested in the dimensions of the spacer of the rear shock as I
always stiffen up whatever bike I buy. Already ordered a Mo-Tech skid plate and Givi crash bars. Do you mean the actual crash bars may crack at their welds? Hopefully only if you drop them and not from vibration?
 

scooter

New member
imported post

imported post

Yup!

The Givi's crack at the flanges that mount to the frame. Caused by motor vibration.

I will find the dimensions for the spacer then you will have it before you remove the shock.
 

klrman

New member
imported post

imported post

Sounds like the beast can vibrate pretty good.! Thanks for the tip so will be watching for it now. Very interested in the shock spacer. Keep reading that when the Throttle Bodies are synced and the FI remapped that this motor just flys. :)
 

klrman

New member
imported post

imported post

Getting pretty exicted to pick up the bikes this week. Was wondering if you have tried different handlebars with good success? The stock ones look like a toy but if I change them, looks like none of the switches, mirrors or even the throttle would fit
a thicker bar.
 

scooter

New member
imported post

imported post

I looked for the spacer dimension, but could not find it.

If you make a spacer with 3 to 5 lines works well. Lines compared to preload lines onshock.



DL1000 has a .760 Kg/Nm front spring.
 

klrman

New member
imported post

imported post

Dealer in Salmon Arm told me to pick up the bikes noon tomorrow so fter a good spin will see how spungy the suspension is. Maybe they changed something on the K7. If not will make that spacer. Thanks scooter. Hope I don't crazy with all that power and end up going 220k on the Coquahalla on my test ride tomorrow.:hf:
 

klrman

New member
imported post

imported post

Was just thinking.... what got me started on the V-Strom was after reading KTMken's thread..this thread! After some back and forth indecisiveness, decided on the V-Strom and took the plunge. See how much damage he can do when he starts a thread:clap:
 
Top