Torque Wrench... do I need one?

Squeege24

New member
I have a new KLR. I'm a handy kinda guy, like to farkle, will weld up my own pannier racks etc.

However, not big on engine work. I can tackle basic repairs and maintenance. I've never had (needed) a torque wrench, haven't used one since Auto Shop in high school (loooong time ago).

Do you have one? Can't live without it sorta thing?
 

Buckethead

New member
imported post

imported post

The previous owner of my old KLR didn't think he needed one - The number of stripped fasteners would disagree. Torque wrenches aren't that expensive, and I consider them neccisary for motorcycle engine work due to the small fasteners and dissimilar metals involved.

If you choose not to use one, have a look at the shop manual and see how low many of the torque specs are - Most fasteners are very easily overtightened.

Happy Wrenching,
Matthew
 
imported post

imported post

Canadian Tire has a sale on right now for torque wrenches. Get a 3/8 one and be done with it. Around $50. Things like axles, triple clamps, fork legs, etc should all be torqued properly. Any engine work will need one too.

Aaron.
 

Squeege24

New member
imported post

imported post

Yea the 3/8" and 1/2" are both on sale...that was the other question I had, which was more versatile, considering a KLR versus say a great big truck etc.
I'm "riding" to c-tire right after work and picking up the 3/8 drive unit...thanks for the tips!
DG
 

Sparkle

New member
imported post

imported post

Man....the worst feeling in the world is when you're snugging up a socket-head-capscrew on your bike and it suddenly gets easier...

The trouble with automotive type torque-wrenches is they're mostly rated too high.The 3/8" torque-wrench I have is rated for 20 to 100 Ft./lbs.and the lowest 3/8 drive I've seen in the stores was 10 to 100 ft/lb. So shop wisely and try to find a 1/4" drive wrench.

A big one is fine for torqing down the head, or the cylinder base but most specifications for case screw and case-cover screws I've seen are for 1mkg or about 7.2 ft/lbs, and sometimes even lower. And you don't want to be putting 20 ft/lbs on a 6x1mm capscrew into a very expensive magnesium motorcycle engine. And there are times you want to tighten one up and you're not at your shop where your wrenches are.

I'm guilty of twisting too much too, and one time I put the handle of my torque-wrench in the vise, and twisted it with my normal allen-wrenches to try and get a "feel" for how much they needed.

I did this after trying to remove my oil-pan 4 months after I put it on....it came off, but it could've been a disaster..

Sparkle
 

Buckethead

New member
imported post

imported post

If you are budget tool shopping, Princess Auto's 3/8" Torque Wrench goes down to 10 ft/lbs. The cheap ones don't compare to a good wrench in terms of accuracy especially in the longer term, for occasional home use these could be a good choice. They put them on sale periodically.

Regardless of what type you get, these are precision tools and the money is wasted if you don't care for the wrench as they can lose accuracy easily. Keep them in their case, and avoid any impact or extreme heat. If it's a dial type, ensure that the spring is unloaded (wrench set to lowest setting) for storage.

Happy Wrenching!
 
imported post

imported post

The Mastercraft 3/8 is rated for 25-250 inch pounds, perfect for motorcycle applications. I know some 3/8 are rated for only 10-20 foot pounds and up, but this one is good for bike work.
 

Squeege24

New member
imported post

imported post

Picked up the 3/8" at C-tire for about $48. The clerk "warned" me that it was in inch/lbs and not ft/lbs. Sounds like the right option for the KLR.
Thanks for all the input!
DG
 

RoscoeP

New member
imported post

imported post

Strongleftleg wrote:
The Mastercraft 3/8 is rated for 25-250 inch pounds, perfect for motorcycle applications. I know some 3/8 are rated for only 10-20 foot pounds and up, but this one is good for bike work.
250 inch pounds = 20.833333 ft pounds so only good for small stuff. You really need 3 torque wrenchs to cover all the nuts and bolts on a bike properly. I have 3 snapon but if I could only haveone I would keep the 10-75 ft. lb 3/8" drive which covers most of the important stuff. The small stuff only use 1/4" drive rachet or short wrenchesetc and go easy. For big stuff like the rear axle nut well I figure it's harder to f--k up. You do get a feel for it after a while Cheers Roscoe:hb:
 
Top