urgent help needed - vreg for DRZ400

kenf

New member
Posting on the off chance somebody has a voltage regulator for a 2001-2011 DRZ400 lying around. My buddy is heading from PG to Kamloops for the Loose Screw this weekend but his regulator died yesterday. Can't find one from any dealer in western canada, so I'm hoping somebody just might have one sitting in a box of DRZ parts nearby.

Thx!
KF
 

kenf

New member
Thanks guys. He said the voltage coming out of the stator looked fine over RPM range, just zero output from the regulator (other than a lot of heat -- no voltage), so pretty sure it's the reg. But I passed along the thumpertalk link for him as well. If you do find your spare, please let me know, that would be very, very awesome :)

Cheers
KF
 

Shuswap

Member
Hope he does the diagnostic tests that lance suggested, it's easy to replace the wrong part with electrical systems. I'd lend him mine but I expect it'll be in service this weekend also.
Hope it comes together for your friend, suck to miss the event over something like this.
 

Bora20

Administrator
Colin at MX1 is shipping me a box of stuff, so if he has what you need, it would get here in time for the event.
 

skidmark43

Administrator / BFF in the blue jacket
Ken, are you avail to do the removal from a donor bike tonight or Thursday in Langley if the opportunity presents?
 

kenf

New member
Can do for sure. Was planning a rip on the street bike tonight anyhow, I could certainly go that direction. I'll be rolling out for Kamloops tomorrow after work, can stop off in Langley on my way out if that time works better. Or can hit up another buddy from Maple Ridge to drop by for me if it needs to be later in the evening. PM me if you want a cell phone or email address for contact info.

Thanks a lot, even if we don't find one, I'm impressed by the supportive community here in trying to help out a fellow rider!

KF
 

JavaJude

Super Moderator
Ken, skidMark sent me a text to look at this thread. I'm the DRZ in Langley he was speaking about if you want to come by and remove it from my bike and borrow it for the weekend. Send me a PM if you want to stop by my place on your way out tomorrow.

Judy
 

kenf

New member
Thanks all for the help and the advice. Turns out it was both the stator and the regulator that seem to have failed together. He had checked the stator for continuity but not for shorts to ground, turns out one coil is shorted too. He's now trying to scrounge up a stator as well, without that the regulator is sort of moot, but I'll know shortly and may still take you up on the offer of the spare. I'll PM you in a bit.

Thx!
KF
 

kenf

New member
Amazingly enough, he has managed to source both a new stator and a new regulator to be waiting for him in Kamloops. Now we just need some enthusiastic mechanics to help us bolt it back together in the Loose Screw camp ground tomorrow night. Anybody out there keen to work for beer? Or just stand around drinking beer and heckling him while he works? :hb:

And yes -- we will do the wrenching over a tarp!
 

Bora20

Administrator
he has managed to source both a new stator and a new regulator to be waiting for him in Kamloops.

And yes -- we will do the wrenching over a tarp!

Good man. You need anyone to pick it up for you tomorrow to make sure you get it before the shop closes?
 

kenf

New member
Thanks to everybody who dropped by to offer suggestions and support, and apologies to everybody that had to listen to the DRZ cranking over for hours on end in the campsite Friday night.

For anybody who was curious as to how it worked out in the end, we spend 8 hours repeatedly disassembling, rewiring, and reassembling the DRZ stator and pickup and sensor coils. Around 1 AM we finally gave up and concluded that the DRZ just wasn't going to join us on the ride. We set off on the A at 7:45, greatly disappointed to have had to "pirate code" one of our gang before we'd even left the camp.

To our astonishment, when we stopped for a water break just after the first miserable face-slapper/log lifting section of the A, the cell phone rang (wow, we actually had coverage at that exact point in the ride!), with Bri announcing he'd got it running and would meet us at Sun Peaks. He rode backwards on the A from there until we hooked up mid-loop.

Turns out the replacement stator came with both the signal coil and pickup coil miswired. We'd guess one was wrong because the wire colors at the connector were swapped, but we never guessed both were backwards. Just after packing up to leave for PG, Bri decided to give it the one last hail mary try and just start swapping leads to see what would happen, and it fired up first try, ran like a champ for the rest of the day! The DRZ rode the last half of the A route and made it back to camp without a hitch. Amazed us all, after we'd given it up for dead the night before.
 
Top