will an e pipe fit an drz400s with little modification

J

jburnin

Guest
I was wondering if I can make a 400e pipe fit my 400s if I just fabricated some brackets or tweaked the existing brackets a little.
Thanks Jacob
 

BMWNut

Member
imported post

imported post

Correct me if I'm wrong but doesn't the S model lack any sub-frame at all? I thought only the E model had a real sub-frame so mounting might be a problem. But what do I know...
 
J

jburnin

Guest
imported post

imported post

i think its the other way around. The s has the subframe.
 

skidmark43

Administrator / BFF in the blue jacket
imported post

imported post

jburnin wrote:
I was wondering if I can make a 400e pipe fit my 400s if I just fabricated some brackets or tweaked the existing brackets a little.
Thanks Jacob
Yes. Most of the aftermarket e-pipes (I'm familiar with FMF particularly) will fit the S models with a little tweaking. The S model uses thepassenger footpeg as a mounting point which the E obviously lacks... this is where you need to fabricate a new mounting point on the subframe or tweak the tab on the pipe.

I have read a rumorthat you may also require an adapter joint to the header; the S uses a smaller diameter head pipe than the E and K models.
 
J

jburnin

Guest
imported post

imported post

Thanx skidmark. I thought I could make it work but wasn't sure. I think The pipe I'm getting comes with a headpipe so the joint should fit. I can't wait.:f::tup::tup:
Thanks, jacob
 
Top