New Life for the BMW G650x
New Life for the BMW G650x
I ended up breaking a frame section on the bimmer a couple of months ago.
Dont ask how, it just happened. I thought it would be the end of the bike for me, not so.
So now its time to take the big 650 apart and see what needs doing
Here is a picture of the most serious damage that makes the bike unridable
If you look to the left of the footpeg you will see a bent peice of aluminum, this was a touratech hard part that was to prevent what happenend, obviously it failed at its job.
The damaged parts that need to be replaced, along with the rear swing arm bearings (which I just replaced) I must buy a new frame part about 375.00 and long bolt.
Here is the mounting tab that has broken from the transmission housing, I have discussed with Wally Routledge about welding this and he sez no problem better than new when he is finished.
Below is the sidestand mount, this is the weak or acutually strong part. If you look at the top left of the sidestand mount you will see a little nub, this is the lower position stop for the sidestand, this is the lowest part of the frame. If you are unlucky to hit this part you will break your frame. I have plans to make this much weaker.
The bike as it looks now
http://www.dualsportbc.com/photogallery/showphoto.php?photo=21061&size=big&sort=1&cat=736